Igmp Filtering Profile - ZyXEL Communications 43222612 User Manual

Table 259 Switching > Multicast > IGMP Snooping VLAN (continued)
LABEL
Add
Edit
Delete
Click Add or Edit button to open the following screen. Use this screen to configure a static VLAN for the
Switch.
Figure 372 Switching > Multicast > IGMP Snooping VLAN > Add or Edit VLAN
The following table describes the related labels in this screen.
Table 260 Switching > Multicast > IGMP Snooping VLAN > Add or Edit VLAN
LABEL
Name
VID
Add/Edit
Clear
Cancel

61.14 IGMP Filtering Profile

An IGMP filtering profile specifies a range of multicast groups that clients connected to the Switch are
able to join. A profile contains a range of multicast IP addresses which you want clients to be able to
join. Profiles are assigned to ports (in the IGMP Snooping screen). Clients connected to those ports are
then able to join the multicast groups specified in the profile. Each port can be assigned a single profile.
A profile can be assigned to multiple ports.
Click Switching > Multicast in the navigation panel. Click the IGMP Filtering Profile tab to display the
screen as shown.
Chapter 61 Switching
DESCRIPTION
Click Add to create a new entry or Edit to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Check the entries that you want to remove, then click the Delete button.
DESCRIPTION
Enter the descriptive name of the VLAN for identification purposes.
Enter the ID of a static VLAN; the valid range is between 1 and 4094.
Click Add or Edit to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Clear to have the fields display blanks.
Click Cancel to change the fields back to their last saved values.
GS2220 Series User's Guide
494