Reboot System - ZyXEL Communications 43222612 User Manual

64.4 Reboot System

Reboot System allows you to restart the Switch without physically turning the power off. It also allows you
to load the Current Configuration, a Custom Default or the Factory Default configuration when you
reboot. Follow the steps below to reboot the Switch.
Click Maintenance > Maintenance > Reboot System to view the screen as shown next.
Figure 388 Maintenance > Maintenance > Reboot System
In the Reboot System screen, click a configuration button next to Reboot System with to reboot and load
1
that configuration file. The following screen displays.
If you select Current Configuration, make sure to save the Switch settings as the current configuration in
the Maintenance > Maintenance > Save Configuration screen.
Figure 389 Reboot System: Use the Current Configuration Confirmation
If you select Factory Default, the following warning will appear.
Figure 390 Reboot System: Use the Factory Default Confirmation
If you select Custom Default, the following warning will appear.
Figure 391 Reboot System: Use the Custom Default Confirmation
Click OK again and then wait for the Switch to restart. This takes up to 2 minutes. This does not affect the
2
Switch's configuration.
Chapter 64 Maintenance
GS2220 Series User's Guide
513