Table of Contents
Advertisement
Figure 50 Wizard > Advanced Settings > Step 1 IP
Each field is described in the following table.
Table 13 Wizard > Advanced Settings > Step 1 IP
LABEL
DESCRIPTION
Host Name
This field displays a host name.
IP Interface
Select DHCP Client if the Switch is connected to a router with the DHCP server enabled. You
then need to check the router for the IP address assigned to the Switch in order to access
the Switch's Web Configurator again.
Select Static IP Interface when the Switch is NOT connected to a router or you want to
assign it a fixed IP address.
VID
This field displays the VLAN ID.
IP Address
The Switch needs an IP address for it to be managed over the network.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address.
Default Gateway
Type the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.1.254.
DNS Server
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. Enter a domain name server IP address in order to be able to use a domain
name instead of an IP address.
Next
Click Next to show the next screen.
Cancel
Click Cancel to exit this screen without saving.
After clicking Next, the Password screen appears.
Chapter 4 Web Configurator
GS2220 Series User's Guide
65
Advertisement
Table of Contents
Troubleshooting
