Set Up Login Accounts - ZyXEL Communications 43222612 User Manual

Table 214 Management > Access Control > SNMP > User (continued)
LABEL
Group
Add
Cancel
Clear
Index
Username
Security Level
Authentication
Privacy
Group
Delete
Cancel

47.4 Set Up Login Accounts

Up to five people (one administrator and four non-administrators) may access the Switch through the
Web Configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The user name for
the Administrator is always admin. The default administrator password is 1234.
Note: It is highly recommended that you change the default administrator password (1234).
• A non-administrator (user name is something other than admin) is someone who can view and/or
configure Switch settings. The configuration right varies depending on the user's privilege level.
Click Management > Access Control > Logins to view the screen as shown.
Chapter 47 Access Control
DESCRIPTION
SNMP v3 adopts the concept of View-based Access Control Model (VACM) group. SNMP
managers in one group are assigned common access rights to MIBs. Specify in which SNMP
group this user is.
admin – Members of this group can perform all types of system configuration, including the
management of administrator accounts.
readwrite – Members of this group have read and write rights, meaning that the user can
create and edit the MIBs on the Switch, except the user account and AAA configuration.
readonly – Members of this group have read rights only, meaning the user can collect
information from the Switch.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to reset the fields to the factory defaults.
This is a read-only number identifying a login account on the Switch. Click an index number to
view more details and edit an existing account.
This field displays the user name of a login account on the Switch.
This field displays whether you want to implement authentication and/or encryption for SNMP
communication with this user.
This field displays the authentication algorithm used for SNMP communication with this user.
This field displays the encryption method used for SNMP communication with this user.
This field displays the SNMP group to which this user belongs.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click Delete to remove the selected entry from the summary table.
Click Cancel to begin configuring this screen afresh.
GS2220 Series User's Guide
407