Attributes Used For Accounting - ZyXEL Communications 43222612 User Manual

This value is set to Ethernet(15) on the Switch.
–
Calling-Station-Id
Frame-MTU
EAP-Message
State
Message-Authenticator

25.6.4 Attributes Used for Accounting

The following sections list the attributes sent from the Switch to the RADIUS server when performing
authentication.
25.6.4.1 Attributes Used for Accounting System Events
NAS-IP-Address
NAS-Identifier
Acct-Status-Type
Acct-Session-ID
– The format of Acct-Session-Id is date+time+8-digit sequential number, for example,
2007041917210300000001. (date: 2007/04/19, time: 17:21:03, serial number: 00000001)
Acct-Delay-Time
25.6.4.2 Attributes Used for Accounting Exec Events
The attributes are listed in the following table along with the time that they are sent (the difference
between Console and Telnet/SSH Exec events is that the Telnet/SSH events utilize the Calling-Station-Id
attribute):
Table 115 RADIUS Attributes – Exec Events through Console
ATTRIBUTE
User-Name
NAS-Identifier
NAS-IP-Address
Service-Type
Acct-Status-Type
Acct-Delay-Time
Acct-Session-Id
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
Table 116 RADIUS Attributes – Exec Events through Telnet/SSH
ATTRIBUTE
User-Name
NAS-Identifier
NAS-IP-Address
Chapter 25 AAA
START INTERIM-UPDATE
 
 
 
 
 
 
 
 

START INTERIM-UPDATE
 
 
 
GS2220 Series User's Guide
256
STOP










STOP


