ZyXEL Communications 43222612 User Manual page 496

Table 262 Switching > Multicast > IGMP Filtering Profile > Add Profile (continued)
LABEL DESCRIPTION
End Address Type the ending multicast IP address for a range of IP addresses that you want to belong to
the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address and End
Address fields.
Add Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Clear Click Clear to have the fields display blanks.
Cancel Click Cancel to leave this screen.
Click the Add Rule button to open the following screen. Use this screen to configure a rule for an IGMP
filtering profile.
Figure 375 Switching > Multicast > IGMP Filtering Profile > Add Rule
The following table describes the related labels in this screen.
Table 263 Switching > Multicast > IGMP Filtering Profile > Add Rule
LABEL DESCRIPTION
Profile Name Select the profile name to add a rule.
To configure additional rules for a profile that you have already added, select the profile
name and specify a different IP multicast address range.
Start Address Type the starting multicast IP address for a range of multicast IP addresses that you want to
belong to the IGMP filter profile.
End Address Type the ending multicast IP address for a range of IP addresses that you want to belong to
the IGMP filter profile.
If you want to add a single multicast IP address, enter it in both the Start Address and End
Address fields.
Add Click this to create a new entry.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the Save link on the top navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Clear Click Clear to have the fields display blanks.
Cancel Click Cancel to leave this screen.
Chapter 61 Switching
GS2220 Series User's Guide
496