Table of Contents
Advertisement
30.2 Ena b le VL AN Ma pping
Click
Adva nc e d Applic a tio n
shown.
Advanced Application > VLAN Mapping
Fig ure 224
The following table describes the labels in this screen.
Table 140 Advanced Application > VLAN Mapping
L ABEL
Active
Port
*
Active
Apply
Cancel
30.2.1 VL AN Ma pping C o nfig ure
Click the
VL AN Ma pping C o nfig ure
this screen to enable and edit the VLAN mapping rules.
Chapter 30 VLAN Mapping
and then
VL AN Ma pping
DESC RIPT IO N
Select this option to enable VLAN mapping on the Switch.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first to set
the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this check box to enable the VLAN mapping feature on this port. Clear this check box to
disable the VLAN mapping feature.
Click
to save your changes to the Switch's run-time memory. The Switch loses these
Apply
changes if it is turned off or loses power, so use the
your changes to the non-volatile memory when you are done configuring.
Click
to begin configuring this screen afresh.
C a nc e l
link in the
GS2220 Series User's Guide
in the navigation panel to display the screen as
link on the top navigation panel to save
Sa ve
screen to display the screen as shown. Use
VL AN Ma pping
293
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
