Table of Contents
Advertisement
BOOK FOLDER INSTALLATION
1.6.7 CHECK THE INSTALLATION
1.
Turn on the power for the Booklet maker.
NOTE: Make sure that the finisher connector is connected to the copier.
Trimmer interior towards Booklet Maker
2.
In the Trimmer, check the Index 16 value [A].
3.
Press the [Tools] button and then the [Service] button.
4.
Key in password 107 and press the [OK] button.
5.
Select BK5030 and press the [Enter] button.
6.
Select NVM and press enter.
7.
Scroll to INDEX 16. TRKnife Zero.
8.
Press the [+] or [-] buttons to enter value [A].
9.
Press the [OK] button.
10. Press the [Exit] button once.
1-61
November 2012
[A]
Advertisement
Table of Contents
