Table of Contents
Advertisement
November 2012
Remove the belt stacker
[A]
1.
Disconnect the power cord to the Booklet Maker (
2.
Loosen screws [A] (
3.
Disconnect the Belt stacker cable (
4.
Remove the Belt stacker from the Trimmer.
5.
Secure screws [A] on the Trimmer.
6.
Remove the positioning pins from the upper holes [B], used for the belt stacker (
7.
Using the second lower hole, install the other positioning pin, using the 25 mm
washer and screw provided (
Trimmer
[B]
x 2 ) securing the Belt Stacker on the Trimmer.
x 1) from the Trimmer.
x 1,
x 1).
1-50
BOOK FOLDER INSTALLATION
Trimmer
x 1).
x 2).
Advertisement
Table of Contents
