Table of Contents
Advertisement
COVER FEEDER INSTALLATION
1.4.2 INSTALLATION PROCEDURE
Unpacking
1.
Remove all parts from the box.
2.
Cut the cable tie [A] to release the paper bin, self adhesive label [B] and DSD
Calibration strip [C].
3.
Discard the self adhesive label [B].
4.
Place the DSD Calibration strip on the cable holder [C] behind the Booklet
Maker rear cover.
1-22
November 2012
[C]
[A]
[B]
[C]
Advertisement
Table of Contents
