November 2012
Docking the BK5030 to the SR5030 finisher
[A]
1.
If installing a Rail unit, install it now.
NOTE: If the Rail unit is installed at a later time the height adjustment of the
Booklet maker has to be redone.
CAUTION
Before docking, make sure the Jogger Fence [A] is in the upper position.
If not, with printer powered on - open and close finisher door.
2.
Dock the Booklet maker to the Docking assembly.
3. The covers of the Booklet maker and the finisher should line up.
Pay attention to vertical and horizontal referens points [B], [C] and [D].
[C]
1-15
BOOKLET MAKER INSTALLATION
[B]
[D]