Table of Contents
Advertisement
TRIMMER INSTALLATION
1.5.6 CHECK THE INSTALLATION
1.
If installing a Book Folder BF5030 continue to section (
1-48) otherwise continue with step 2.
2.
Turn on the power for the Booklet maker.
NOTE: Make sure that the finisher connector is connected to the copier.
Trimmer interior towards Booklet Maker
3.
In the Trimmer, check the Index 16 value [A].
4.
Press the [Tools] button and then the [Service] button.
5.
Key in password 107 and press the [OK] button.
6.
Select BK5030 and press the [Enter] button.
7.
Select NVM and press enter.
8.
Scroll to INDEX 16. TRKnife Zero.
9.
Press the [+] or [-] buttons to enter value [A].
10. Press the [OK] button.
11. Press the [Exit] button once.
1-43
November 2012
1.6 on page
[A]
Advertisement
Table of Contents
