Table of Contents
Advertisement
November 2012
Interface to SR5030 Finisher
[C]
[B]
[D]
1.
Remove Finisher Back Cover [A] (
2.
Guide the communication cable through opening [B] on back cover (The cable
is part of the installation kit).
3.
Make a loop on the cable [C] and attach a Cable tie.
4.
Install the communication cable, to connector CN2 [D] (
main board.
BOOKLET MAKER INSTALLATION
[A]
x 5).
1-13
Finisher Main PCB
x1) on the finisher
Advertisement
Table of Contents
