Table of Contents
Advertisement
ROTATOR CREASER TRIMMER INSTALLATION
Install Rail Extension
[A]
[B]
[E]
6.
Remove the Rail stop from the Rail under the CT5030.
7.
Insert the Rail extension [A] into the Rail under the Trimmer [B].
8.
Press the plugs [C] into the holes in the Rail under the Trimmer and press/
hammer down the plugs (
9.
Insert the Rail stop [D] into the Rail extension.
10. Secure the Rail stop with the screws [E] (
11. Select correct hole [F].
Select this hole
if CT 5010/CT 5030 is installed
x 4).
1-67
November 2012
[C]
[D]
[F]
Select this hole
if CT 5010 /CT 5030 is NOT installed
x 4).
Advertisement
Table of Contents
