Table of Contents
Advertisement
November 2012
E. Press down the green marks on Paper bin and load the covers.
F. Move the adjustable side guides up against the covers, until there is no clear-
ance.
G. Set up the Cover Feeder to Cover ON, the fan will start and the Cover
Feeder will prefeed the first cover to be ready for the set from the copier.
23. Set up the Booklet maker to A4/8.5 x 11" paper size.
24. Send one A4/8.5 x 11" job to the Booklet maker system.
25. Check that the covers are correctly fed into the Booklet maker.
26. A. Set up the Cover Feeder to Cover OFF and remove all covers from the bin.
Use the Purge mode to completely empty the Cover Feeder from covers.
B. Prepare a 15mm high stack of A3/11 x 17" covers.
C. Repeat step 22 B to 22 G.
27. Set up the Booklet maker to A3/11 x 17" paper size.
28. Send one A3/11 x 17" job to the Booklet maker system.
29. Check that the covers are correctly fed into the Booklet maker.
COVER FEEDER INSTALLATION
1-31
Advertisement
Table of Contents
