Table 5- 1 Led Labels And Meanings; Figure 5- 4 Charge Complete Screens - Webasto SVS300 Installation, Operation And Maintenance Manual

Mhe intelligent fast charging systems

Hide thumbs

Table Of Contents

Table of Contents

SVS-200

LED Label

Equalizing

Charge Complete

80% Charged

Charging

Fault/Warning

Step 2: Stop Charging

Once the battery has been fast-charged to the SOC preset in the BMID or Charger, the SVS-

300 will stop the charge and illuminate the "Charge Complete" LED. If an equalization charge

is scheduled for this battery pack, the Charge Complete will not illuminate until the

equalization has been completed. The operator may stop charging at any time without waiting

for the charge to complete, by pressing the "STOP" button or disconnecting the battery cables

from the charger.

After a charge has been completed or stopped by the user, the screen will indicate the method

in which the charge was stopped and the data values just before the end of charging will be

displayed (see Figure 5- 4).

C h g C o m p l e t e

6 2 . 0 V

Step 3: Disconnect battery cables from charger

NOTE:

If the operator disconnects the cables without pressing STOP, the charger will

20153-W-03-01

IMPORTANT INFORMATION – SAVE THESE INSTRUCTIONS