Profile Records (P330 To P337) - Siemens MAG 1100 Operating Instructions Manual

P322 LCD Total Low [MR 200]
View and/or alter the four least significant digits of the totalizer value.
Primary Index
Values
Related
P323 LCD Total High [MR 200]
View and/or alter the four most significant digits of the totalizer value.
Primary Index
Values
Related

Profile Records (P330 to P337)

WARNING:
These parameters are for authorized service personnel or technicians familiar
with Siemens Milltronics echo processing techniques.
These features can record up to ten Echo profiles, initiated manually (P330), or
automatically (P331 et al). If ten Profiles are already saved, addresses 1 through 10 are
filled, the oldest automatically initiated record is overwritten. Manually initiated records
are not automatically overwritten. All records are automatically deleted in the event of a
power interruption.
When a record is displayed, results are based on current programming (which may have
been altered since the record was saved). This permits the effect on the echo profile to be
observed when changing an echo parameter.
7ML19981FB05 MultiRanger 100/200 – INSTRUCTION MANUAL
Single Point Model
Global
Range: 0.000 to 9999
• P630 LCD Totalized Multiplier
• P633 LCD Totalized Decimal Position
• P737 Primary Reading
Single Point Model
Global
Range: 0.000 to 9999
• P630 LCD Totalized Multiplier
• P633 LCD Totalized Decimal Position
• P737 Primary Reading
Dual Point Model
Transducer
Dual Point Model
Transducer
Page 159