SITRANS F M
Limit/direction
Batch
(MAG 6000 only) Non CT
(Possible through relay and
digital output)
8.4.4
Relay outputs
Cleaning
8.4.5
External input
Non CT versions only
68
8. Commissioning
Limit switches are available for both digital and relay outputs.
Direction mode: 1 set point at 0% flow; hysteresis 5%.
If 2 set points must activate 2 separate outputs, a single set point has to be selected individually for
digital as well as relay outputs.
Note
When batch function is on relay - the pulse/frequency output is not possible.
The relay output must always be used to operate the cleaning unit when a cleaning unit has been
installed together with the transmitter. The relay output cannot be used for other purposes.
Batch control is available on MAG 6000 only.
Menu detail