Environmental Requirements - GE LOGIQ A100 Technical Publication

Preparing the System for Use
Before the system arrives (cont'd)
S
.
This medical equipment is approved, in terms of the
prevention of radio wave interference, to be used in
hospitals, clinics and other institutions which are
environmentally qualified. The use of this equipment in
an inappropriate environment may cause electronic
interference. Refer to the LOGIQ α100 Service Manual
(2139768) and this manual for details. This equipment
can be used in residential areas only under the
supervision of physicians or qualified sonographers.

Environmental Requirements

For proper functioning of the LOGIQ
must be taken when it is transported or stored.
Operational
_
Temperature 10 _ to 40
50 to 104
Humidity 30 to 75%
non–condensing
Pressure 700 to 1060hPa
Table 1. Environmental Requirements
16
Take precautions to ensure that the system is
protected from electromagnetic interference.
Precautions include:
S
Operate the system at least 15 feet away from
motors, typewriters, elevators, and other
sources of strong electromagnetic radiation.
S
Operation in an enclosed area (wood, plaster
or concrete walls, floors and ceilings) help
prevent electromagnetic interference.
S
Special shielding may be required if the
console is to be operated in the vicinity of
Radio broadcast equipment.
Storage
_ _
_ C –10 to 60 _ _ C
F 14 to 140
30 to 90%
non–condensing
700 to 1060hPa
α100 system, care
Transport
_ _
–40 _ to 60 C _
F –40 to 140 F
30 to 90%
non–condensing
700 to 1060hPa
t
α 100 User Manual
LOGIQ
2211157–100 Rev 0