Home Position For Comment - GE LOGIQ A100 Technical Publication

Configuration Using Control Keys

Home Position for Comment

Press the COMMENT key. When the cursor appears, use
the TRACKBALL to move the cursor to the desired home
position. Press CONTROL C to set the home position.
When the COMMENT key is pressed again, the cursor
appears in the home position as set above.
Press CONTROL
Ctrl
Enter
Press C to set the home position for the cursor in the
comment mode.
C
Press ENTER to accept the home position for the cursor
Ctrl
and exit the Control mode.
Enter
240
t
α 100 User Manual
LOGIQ
2211157–100 Rev 0