GE LOGIQ A100 Technical Publication page 105

Connecting the Two Probe Port (cont'd)
Two Probe Port Lock
Align Two Probe
Connector
Align slots
Replace Probe
Holder
The Two Probe Port has now been secured and is ready
for use.
t
α 100 User Manual
LOGIQ
2211157–100 Rev 0
3. Ensure that the Two Probe Port Lock points to
the 12 o'clock position.
4. Align the Two Probe Connector with the System
Probe Port and carefully push in place.
5. Align the slots on the upper flange to its
counterparts on the system.
6. Turn the Two Probe Port Lock to the 3 o'clock
position to secure the Two Probe Port to the
system.
7. Carefully replace the probe holder to its place and
press firmly till the projections at the bottom fit into
the slots in the upper flange and the system.
Two Probe Port
89