Measurement Averaging Page; Overview - GE LOGIQ A100 Technical Publication

OB Report Page

Measurement Averaging Page

Overview

The Measurement Averaging Page enables the display
and selection of measurement values, that will be
included or excluded from the data, to be used in the
calculation of results displayed on the main OB Report
Page. Press the RIGHT or LEFT ROTATE keys while
displaying the OB Report Page to display the
Measurement Averaging Page. Press the RIGHT or
LEFT ROTATE keys again to exit the Measurement
Averaging Page.
The choices to be entered on the Report Display are:
Y – Use this measurement for averaging
.
N – Do not use this measurement for averaging
D – Erase or delete this measurement
If there is no measurement with a 'Y', the average will not
be displayed.
200
t
α 100 User Manual
LOGIQ
2211157–100 Rev 0