Measurement Of Volume By Approximation To A Sphere (One Distance Method) - GE LOGIQ A100 Technical Publication

Measurement of Volume by approximation to a Sphere (One
Distance Method)
This method is appropriate for structures having radial
symmetry.
Pre Selection
Scan and obtain a cross section of the structure the
volume of which is to measured.
Measure the diameter. (For details of distance
measurement please refer page 103).
Press 2
The volume is calculated and displayed on the left side of
2
the screen in the calculation result area. The
measurement d
Post Selection
Scan and obtain a cross section of the structure the
volume of which is to measured.
Press 2 . The 2:VOL item gets highlighted.
2
2:VOL
Measure the diameter. (For details of distance
measurement please refer page 103).
Press CLEAR . The volume is calculated and displayed
on the left side of the screen in the calculation result
area. The measurement d
displayed.
t
α 100 User Manual
LOGIQ
2211157–100 Rev 0
Basic Measurements
used in the calculation is also displayed.
1
used in the calculation is also
1
113