Rinse-Aid Injector/Signal For Chemical Dispensing Systems By Others - Champion DH6000T-VHR Installation Manual

Rinse-aid Injector for Chemical Dispensing System by
others.
R /A
Fig. 23
Rinse-aid Signal for Chemical Dispensing System by
others.
120VAC FUSE BLOCK-1.5 AMP-
MAX LOAD RINSE-AID SIGNAL
CONNECTION. LOCATED ON
FRONT BASE.
SIGNAL ENABLED DURING FINAL
RINSE CYCLE.
STD. RINSE/RACK: .73 US GAL/.61 IMP. GAL/ 2.8L
POT,PAN,RINSE/RACK .73 US GAL/.61 IMP.GAL/ 2.8L
1/8" NPT PIPE PLUG AT THE REAR OF THE MACHINE
NEAR THE VACUUM BREAKER FOR RINSE-AID INJECTION.
SIGNAL ENABLED DURING FINAL RINSE CYCLE.
LINE
DETERGENT
POWER
COMMON
120VAC
120VAC
NEUTRAL
1.5 AMP
1.5 A
MAX. MAX.
Fig. 24
Installation
RINSE AID
120VAC
1.5 AMP
MAX.
19