[Custom]; [Custom Adj.]; [Digital Zoom +] - Christie LX1750 User Manual

[Screen] menu

[Custom]

The image is projected using the values registered as
[Store] in the [PC adjust] menu.
z When there is no input signal, [Custom] can be
selected but the image will be projected in [Normal]
mode.
1) Press ▲▼ to select [Custom].
2) Press the <SELECT> button.

[Custom adj.]

Adjusts the horizontal and vertical scale and position.
z When there is no input signal, this item is grayed
out and cannot be selected.
z If the input signal is lost during adjustment, the
adjustment value is stored and the [Aspect]
adjustment screen is cleared.
1) Press ▲▼ to select [Custom adj.], and
press ▶ .
z
z The adjustment screen of the sub menu 2 is
displayed.
2) Press ▲▼ to select an item, and press
the <SELECT> button.
3) The advanced menu is displayed.
z
z To adjust [H&V], press the <SELECT> button
and adjust on the sub menu 2 screen.
z
z Press the <SELECT> button for [Common] and
[Reset]. Select [Yes] and press the <SELECT>
button.
z
z While the advanced menu is displayed, press
▲▼ to display menus other than [H&V],
[Common] and [Reset] in order.
4) Press ◀▶ to adjust the setting.
z
z Press the <SELECT> button to return to the
sub menu.
[Scale H] Adjusts the horizontal scale.
[Scale V] Adjusts the vertical scale.
When adjusting the vertical and
horizontal scale, select [On] to link
the vertical and horizontal scales
and preserve the aspect ratio of the
[H&V]
image.
z As you adjust the numerical value
[Position H] Adjusts the horizontal shift.
[Position V] Adjusts the vertical shift.
Applies the adjusted content to all
[Common]
inputs.
[Reset] Resets all the adjusted content.
56 - ENGLISH
of [Scale H], the numerical value
of [Scale V] changes accordingly.

[Digital zoom +]

1) Press ▲▼ to select [Digital zoom +].
2) Press the <SELECT> button or ▶ .
z
z The menu screen is cleared and [Digital zoom +]
is displayed.
3) Press the <SELECT> button.
z
z Each press of the button enlarges the image.
z Press ▲▼◀▶ to move the image. z
z
z The image move function only works when the
image size is larger than the panel resolution
*1: The panel resolution of the projector is 1 024 x 768 dots.
Note
z When there is no input signal, [Digital zoom +] is
grayed out and cannot be selected.
z When [True] is selected, [Digital zoom +] cannot be
selected.
z To end the [Digital zoom +] operation, press any
button other than the <D.ZOOM>, <SELECT>, and
▲▼◀▶ buttons.
*1
LX1750 User Manual
020-000638-01 Rev.1 (11-2013)