Table of Contents
Advertisement
E30A Emulator User's Manual
2.4 Connecting the AC Adapter to the E30A Emulator
Connect the included AC adapter to the E30A emulator.
(1) Check to see if the E30A emulator power switch is OFF.
(2) Connect the DC output cable of the AC adapter to the DC power input connector of the E30A emulator.
(3) Connect the AC power cable to the AC power input connector of the AC adapter.
(4) Connect the AC power cable to the outlet.
Warning for the AC Power Cable:
If the included AC power cable does not fit the receptacle, do not alter the AC power cable and do not
plug it forcibly. Failure to comply may cause electric shock and/or fire.
The included AC power cable complies with American UL Standard. Use an AC power cable which
complies with the safety standard of the country.
The rated voltage for this cable is 125 volts. When you connect to a power supply of more than 125V,
use an appropriate cable for the voltage.
Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.
2.5 Connecting the E30A Emulator and the Host Machine
Connect the E30A emulator to the host machine with the included USB I/F cable.
(1) Connect the A-plug of the USB I/F cable to the USB I/F connector of the host machine.
(2) Connect the mini-B plug of the USB I/F cable to the USB I/F connector of the E30A emulator.
Note on USB I/F Cable:
The USB I/F cable included with the product is compliant with USB 2.0 High Speed standard. Be sure to
use the included USB I/F cable for the E30A emulator.
R20UT0422EJ0501 Rev.5.01
Mar 15, 2016
WARNING
2. Setup
Page 23 of 65
Advertisement
Table of Contents
