M3028BT2-CPE User's Manual
2.5 Connecting the Host Machine
Connect the emulator and the host machine with the USB interface cable.
Connect the USB interface cable (included) to the USB interface connector (J2) and the USB port of the host machine (see
Figure 2.5).
Figure 2.5 Connecting the emulator system
REJ10J1457-0300 Rev.3.00 July 22, 2009
To emulator power supply
Connect the power cable to connector J 1.
POWER
LED1
SYSTEM
POWER
SAFE
STATUS
SAFE
LED2
COMPACT EMULATOR
M3028BT2-CPE
LED3
POWER
POWER
CLOCK
CLOCK
TARGET
RESET
RESET
STATUS
RUN
RUN
LED6
COMPACT EMULATOR
MADE IN JAPAN
To host machine
Connect the USB interface cable to
connector J2.
POWER USB
5.0V
SW1
J2
J1
5.0V
JP2
3.3V
EXT
JP1
INT
MADE
2. Setup
Page 24 of 90