ShoreTel Service Appliance 100 Installation Manual page 80

SA-100 Planning, Installation, and Administration Guide
NOTE The SA-100 can generate more than 1GB of data files per day and easily have
more than 100GB stored internally.
To configure the SA-100 to perform automatic backups using an FTP server, do the
following:
Requirements:
Make sure that the FTP server is configured to allow the SA-100 to access and
•
write to it.
Make sure that port 21 is open and available on the FTP server for the SA-100 to
•
use.
Note Port 21 is often blocked.
For more information about configuring automatic backup for ShoreTel services and
devices, refer to the Voicemail Model Switches section in the ShoreTel 12: System
Administration Guide.
Step 1 Launch ShoreWare Director.
Step 2 Select Administration > Platform Hardware > Voice Switches / Service
Appliances > Primary. The Primary Voice Switches/ Servic Appliance page
appears.
Step 3 In the Name column, select the SA-100 that you want to configure for
backup. The Edit Service Appliance 100 page as shown in Figure 9-1 appears.
Figure 9-1 Edit Service Appliance 100 Page
Step 4 Scroll down to the Backup section and do the following:
80
Chapter 9: Backup and Restore