Table of Contents
Advertisement
Site Requirements and Preparation
This chapter provides information about preparing your site for the SA-100
including concerns such as physical space, environment, and cabling. This chapter
includes the following topics:
"Recommendations" section on page 27
•
"Physical Specifications" section on page 27
•
"Physical Specifications" section on page 27
•
"Power Cable" section on page 30
•
"Ethernet Ports" section on page 30
•
"Maintenance Cable" section on page 31
•
"Environmental Requirements" section on page 31
•
4.1
Recommendations
The following recommendations will assist you in planning and preparing your site
for the ShoreTel system.
Hire a cabling contractor to install your racks, patch panels, and cabling.
•
Have two RJ-48C cables ready for each SA-100.
•
Reputable surge protector or UPS
•
For remote deployment, your network should have 384 kbs bandwidth or
•
better available between the FTP server and the remote SA-100 for
downloading upgrade software.
4.2
Physical Specifications
This section provides physical and consumption information about the SA-100.
Units have a 1U footprint and fit into a standard 19-inch mounting rack. Full-length
mounting rails are shipped in the package. Table 4-1 provide specification
information about the SA-100.
.
1. MTBF estimates the effective reliability of the SA-100 system. MTBF is calculated using the
Bellcore reliability model.
NOTE Files are not automatically deleted. Users must remove their own files.
Excessive clutter on the drive can affect performance.
ShoreTel 12.3
C
H A P T E R
4
27
Advertisement
Table of Contents
