Table of Contents
Advertisement
SA-100 Planning, Installation, and Administration Guide
Table 6-1 Registration Fields for the SA-100 (Continued)
Field
Assign User Group
(required)
Backup Section
Enable Daily Backup
IP Address
FTP Port
Directory
User ID
Password
6.2.6
Verify Date and Time Synchronization
Step 1 On your SA-100, open a Windows secure shell (SSH) window.
Step 2 Run the "date" command.
Step 3 Verify that the date and time on your SA-100 are synchronized with the
date and time on your NTP server.
6.2.7
Configure Backup SA-100 for Headquarters Server
The SA-100 provides services for users associated with the ShoreTel site where it is
installed and to users of any site in the ShoreTel hierarchy that shares a branch with
the installation site. Unless an SA-100 is installed or configured on the ShoreTel HQ
site, all system users may not have access to SA-100 services. To ensure that all
system users have access to SA-100 services when there is no unit installed on the HQ
site, you can configure a backup site containing an SA-100 for the HQ server.
Configuring the backup site with the HQ server establishes a hierarchical branch
that allows all users throughout the system access to SA-100 services.
To configure a backup SA-100 site on the HQ server:
Step 1 Launch ShoreWare Director.
Step 2 Click Administration > Sites. The Sites page appears.
Step 3 In the Site column, select HQ server site. The configuration page for the
HQ site appears.
Step 4 In the Service Appliance Conference Backup Site field, select a site.
Step 5 Click Save.
46
Description
Select the user group that you to associate with the SA-
100. Audio Conference is the default value.
Check to have the SA-100 perform a backup daily.
Enter the IP address of the device that you want the
SA-100 to back files up to.
Enter the port number that you want the SA-100 to use
for backup. This field is required.
Enter the URL for the directory to which you want the
SA-100 to back files up.
Enter the user name that you want the SA-100 to use to
access the backup directory.
Enter the password the SA-100 is to use to access the
backup directory in both fields.
NOTE The backup site can be a logical site.
Chapter 6: Configuring the SA-100
Advertisement
Table of Contents
