Table of Contents
Advertisement
You must register the SA-100 with the ShoreTel system and configure the system to
use the SA-100.
Topics discussed in this chapter:
"Upgrading Firmware" on page 39
•
"SA-100 Configuration Process" on page 40
•
"SA-100 Conference Administration Interface" on page 61
•
6.1
Upgrading Firmware
During the ShoreWare Director configuration, the appliance may require a firmware
upgrade to the latest version.
Upgrading the firmware of an SA-100 located at a remote site requires a minimum
bandwidth of 384 kbps between the appliance and the ShoreTel headquarters server
providing the upgrade firmware.
A remote upgrade may not be possible if the minimum required bandwidth is not
available.
The firmware upgrade requires 45 minutes at the minimum bandwidth; higher
bandwidth reduces the upgrade time.
For more information on ShoreWare Director, see the ShoreTel 12.3 System
Administration Guide.
ShoreTel 12.3
Configuring the SA-100
C
H A P T E R
6
39
Advertisement
Table of Contents
