6.2.10.2 Upload Https Certificate - ShoreTel Service Appliance 100 Installation Manual

SA-100 Planning, Installation, and Administration Guide

6.2.10.2 Upload HTTPS Certificate

You can upload certificates for a single SA-100 or for all of the SA-100 currently
installed on your system depending upon your certificate agreement.
To upload HTTPS certificates:
NOTE Wildcard certificates that you upload are automatically transferred to all
appliances including units that you add to the system later.
Step 1 Launch ShoreWare Director as a user with administrator privilege. (The
default administrator, admin, cannot be used.)
Step 2 Click Administration > Platform Hardware > Voice Switches/Service
Appliances > Primary. The Primary Voice Switches/Service Appliances
page appears.
Step 3 Select an SA-100 listing and in the Quick Launch column click Launch.
The Service Appliance Conference Administration Conferences page
appears as shown in Figure 6-8 on page 54.
Step 4 Click the HTTPS tab. The HTTPS tab appears as shown in Figure 6-9 on
page 55.
Step 5 Scroll to the Upload CA-Authorize SSL Certificate section and do the
following:
Step a Check the This is a wildcard certificate check box to use the certificate
Step b In the SSL Certificate field, enter or browse to the path to the file that
Step c In the Intermediate CA Certificate field, enter or browse to the path to
Step d In the Private Key field, enter or browse to the path to the file that
Step e Click Upload.
Step 6 Click Restart Web Server. This reboots the SA-100 and activates all
certificates when the unit restarts.
56
and private key you are about to upload on all SA-100s on your
ShoreTel system.
contains the SSL certificate that you want to use. This field is required.
the file that contains the intermediate SSL certificate that you want to
use.
contains the Private Key that you want to use.
Chapter 6: Configuring the SA-100