ShoreTel Service Appliance 100 Installation Manual page 66

Table of Contents

Advertisement

SA-100 Planning, Installation, and Administration Guide
Figure 7-1
The SA-100 installed in your ShoreTel system are listed in the Server/Appliance
column. The green and red arrow to the left of the listing indicate whether an error
(red) is registered with the unit. Additional basic information about the units is
shown to the right of the listing and includes the following:
Switches
— Site: Lists the sites that are installed on your ShoreTel system.
— TMS Comm: Indicates the number of active appliances and switches on the
site and the number of registered appliances and switches on the site.
— Usage: Reports the current state of the site.
— Service: Indicates the current service status of the site.
Server/Appliance: Lists the names of all the appliances and servers in the
ShoreTel system
— Type: Lists the appliances and servers installed on your ShoreTel system.
— Status: Indicates the current service status of the appliance or switch.
— Services: Indicates the current service status of the appliance or switch.
— DB: Not used for SA-100. Shows whether that server has a copy of the
database.
— Disk Used: Shows percentage of the hard disk that is being used.
— Today's events. Not reported separately for Service Appliances. All SA-100
events are reported in the Application Event log.
66
Quick Look Panel
Chapter 7: Maintenance

Advertisement

Table of Contents
loading

Related Products for ShoreTel Service Appliance 100

This manual is also suitable for:

Sa-100

Table of Contents