Table of Contents
Advertisement
SA-100 Planning, Installation and Administration Guide
Step 4 At the Login prompt, type the user ID required to enter the CLI interface
Step 5 At the Password prompt, type the password required to enter the CLI
Figure 5-2
Step 6 Type 3 and press Enter to change the system configuration. The Change
Figure 5-3
36
and press Enter. The default login name is admin. The Password prompt
appears.
interface and press Enter. The default password is ShoreTel. The ShoreTel
command-line interface as shown in Figure 5-2 appears.
ShoreTel Command Line Interface
NOTE You can change the default CLI user name and password for the
SA-100 in ShoreWare Director. Refer to the ShoreTel 12: System
Administration Guide for more information.
System Congifuration menu appears as shown in Figure 5-3.
Change System Configuration Menu
Chapter 5: Installing the SA-100
Advertisement
Table of Contents
