Table of Contents
Advertisement
SA-100 Planning, Installation, and Administration Guide
Step b Click Go to enable HTTPS.
NOTE When using a self-signed certificate, user uploads to Personal or Shared
Library may fail if using the FireFox web browser to access the Conference
Web Portal.
NOTE User's who access the Conference Web Portal on appliances with HTTPS
enabled and who use the FireFox web browser must disable Transport Layer
Security (TLS) to properly render web pages. To disable TLS in Firefox:
— Select Tools > Options.
— Click the Advanced tab
— Click the Encryption tab.
— Uncheck "Use TLS 1.0".
— Click OK.
6.2.11 Create SA-100 Users
Anyone can participate in or initiate ad hoc SA-100-managed conference calls.
However, the SA-100 users referred to here are ShoreTel system users who are
granted accounts that allow them to schedule and host conferences on SA-100s. For
information about configuring users, refer to the ShoreTel 12.3 System Administration
Guide.
To configure SA-100 users:
Step 1 Launch ShoreWare Director.
Step 2 Click Administration > Users > Individual Users. The Individual Users page
appears.
Step 3 Select the user for whom you want to enable the service. The Users page
containing the profile of the user you select appears.
Step 4 Scroll down to Conference Setting section near the bottom of the page.
Step 5 In the Appliance field, select the SA-100 that you want the user to use for
conference calls.
Step 6 Click Save.
NOTE If you are not running proxy services on your network, we recommend that
you disable the Microsoft Internet Explorer Internet Option setting
"Automatically detect settings" on the machines of conference users. This
setting can cause the Windows Presenter on user machines using a WiFi
connection to take up to 30 seconds to load during conferences.
58
units that are currently offline are brought online and when
new units are added.
Chapter 6: Configuring the SA-100
Advertisement
Table of Contents
