ShoreTel Service Appliance 100 Installation Manual page 45

Chapter 6: Configuring the SA-100
Figure 6-3 Service Appliance Page
Table 6-1 Registration Fields for the SA-100
Field
Name (required)
Site (required)
IP Address (required)
Ethernet Address (required) Enter the Ethernet address (MAC address) found on
Fully Qualified Domain
Name (required)
Server to Manage Switch
(required)
Conference Section
HTTPS
Extension (required)
ShoreTel 12.3
SA-100 Planning, Installation, and Administration Guide
Description
Enter the name that you want to use to identify the
SA-100.
Verify that the site listed is the site you want this SA-
100 to use.
Enter the IP Address assigned to the SA-100.
You can use the Find Switch feature to select SA-100
units that are on the same network segment as the
headquarters server.
the ShoreTel Inc. label on the back of the unit.
Enter the complete domain name or IP address
assigned to the SA-100 server. (You can click Ping to
verify that the unit can be found on the network.)
Select the ShoreTel server that you want to use to
manage the SA-100.
Enter the ShoreTel extension that you want to assign
to the SA-100. Users will use this extension to dial into
conference calls hosted on the unit.
45