Table of Contents
Advertisement
Chapter 7: Maintenance
Conferencing: Provides system-wide information about Web and audio
•
conferencing capacity.
— In-Use: Indicates the total number of audio and Web conference ports
currently in use.
— Licensed Capacity: Indicates the number of audio and Web licenses
available in your system.
— System Capacity: Indicates the maximum number of simultaneous audio
and Web conferences requested.
7.2
Viewing System Information
You can view information about the system configuration of your SA-100s by site.
To the system information, do the following:
Step 1 Launch ShoreWare Director with administrator privilege. The Quick
Step 2 In the Site column, select the site on which the SA-100 that you want to
Figure 7-2
The columns on the Maintenance - Voice Switches and Service Appliances Summary
panel that are relevant to the Service Appliance 100 are as follows:
Switch/Appliance - the name of the Service Appliance 100.
•
Type - the ShoreTel nomenclature (e.g SA-100 Collab).
•
IP Address - the IP address of the SA-100.
•
MAC Address - the ethernet address of the SA-100.
•
Comm: This indicates the number of voice switches with which this switch is
•
currently communicating. This is expressed as a fraction (# switches
communicating /# total switches).
Clicking the Comm fraction takes you to the Switch Connectivity panel, which
provides more detail on each switch's communication status. See section 7.4.2
for details.
Audio Ports: The number of current audio ports in use on the SA-100.
•
Web Ports: The number of current Web sessions in use on the SA-100.
•
ShoreTel 12.3
Look panel appears.
view is installed. The Maintenance Switches and Service Appliance
Summary panel appears as shown in Figure 7-2.
Maintenance Switches Summary panel
SA-100 Planning, Installation, and Administration Guide
67
Advertisement
Table of Contents
