SA-100 Planning, Installation and Administration Guide
All power and environmental requirements are met.
•
5.2
Verifying the Contents of the SA-100 Box
This section lists the items you should receive in your ShoreTel SA-100 package.
Inspect the package carefully before you open it and contact the shipper if it is
damaged. If items are missing from the package, contact your ShoreTel partner or
ShoreTel technical support. The items in the box include the following:
ShoreTel Service Appliance 100
•
Power cord
•
Rack mounting kit
•
ShoreTel front bezel kit
•
ShoreTel Quick Install Guide.
•
Product Information Guide
•
5.3
Mounting the ShoreTel Service Appliance 100
The SA-100 is shipped with a rack mounting kit that includes mounting instructions.
The kit is designed to accommodate different types of equipment racks. Use the kit
instructions to attach the rails to the SA-100 and mount the unit in the rack.
CAUTION Make sure there is ample space between the front panel and back panel
5.4
Connecting the Power Cable
The SA-100 is shipped with a power cable that is appropriate for the location to
which it is shipped. If you receive the wrong cable with the unit, contact your
ShoreTel partner or ShoreTel technical support.
WARNING Electrical surges in the AC line can damage unprotected equipment.
Press the power button on the front panel to turn the unit on. The LED in the power
button comes on and the SA-100 performs a start-up process. The fan spins up and a
sequence of numbers flash on the LED block on the front panel. The fan will quiet
down and a solid LED appear when the process is complete. The process takes about
30 seconds. If the fan does not come on or the numbers do not flash, ensure that the
power cord is plugged into the power source and the power source is working. If the
appliance still fails to power on, contact your ShoreTel partner or ShoreTel technical
support.
34
of the SA-100 and any other surface to allow ample ventilation for the
unit.
ShoreTel recommends that you use a reputable AC surge protector or
UPS to connect the SA-100 to the AC line.
Chapter 5: Installing the SA-100