Keyboard Control Character Output; Numeric Keypad Mode - Novanta JADAK FM-8 User Manual

Keyboard Control Character Output

Use these commands to enable or disable sending a text string instead of a control
character. For instance, instead of sending out an actual Carriage Return (hex: 0D), it
will send [CR] as readable ASCII text. Default = Disabled.
Note: These commands are not applicable for RS-232 FM-8/FM-9 versions.
Enable

Numeric Keypad Mode

Use these commands to send the data as if it were entered on a numerical keypad.
This of course only applies to numbers 0 to 9. Default = Disabled.
Note: These commands are not applicable for RS-232 FM-8/FM-9 versions.
Enable
JADAK FM-8/FM-9 User's Manual
* Disable
* Disable