No Reads; No Read Message - Novanta JADAK FM-8 User Manual

No Reads

Not every trigger event will result in a successful barcode read. When there is no barcode read
after a trigger release, the engine may return a no read signer in the form of the characters NR
(which can be customized).
Scan one of the following codes to enable or disable the NR message.
Default = Disable No Read.
Enable No Read

No Read Message

The aforementioned No Read signer (NR) can be changed if you require a custom message.
By using the command NORDMSG with ASCII text (up to a 100 characters) you can customize
this message. Several typical No Read Message menu command barcodes are included below.
Default = NR.
Setting Examples:
* No Read Message: NR
* No Read Message: NoRead
JADAK FM-8/FM-9 User's Manual
No Read Message
* Disable No Read
No Read Message: No BC
No Read Message: <NR>