Gs1 Databar Expanded (Formerly Rss-Expanded); Gs-1 Databar Expanded Defaults; Gs-1 Databar Expanded On/Off; Gs-1 Databar Expanded Minimum And Maximum Length - Novanta JADAK FM-8 User Manual

GS1 DataBar Expanded (Formerly RSS-Expanded)

GS-1 DataBar Expanded Defaults

Set the GS-1 Databar settings to their default configuration by scanning this code.

GS-1 DataBar Expanded On/Off

Scan one of the codes below to enable or disable GS1 DataBar Expanded.
Default = Enabled.
* Enable

GS-1 Databar Expanded Minimum and Maximum Length

Use the following commands in combination with numerical values to set the minimum
and maximum length for allowed GS-1 Databar Expanded (RSS-Expanded) barcodes.
Default minimum length = 4. Default maximum length = 74.
The minimum and maximum length for this symbology can be set either by sending the
serial command shown under the barcodes below with a value between 4 and 74, or by
scanning one of the barcodes below and then set the length by scanning the digit codes
and the SAVE barcode in
Please contact JADAK if assistance is needed.
RSS-E Minimum length
JADAK FM-8/FM-9 User's Manual
Appendix B .
Disable
RSS-E Maximum length