Auto Exposure; Maximum Exposure; Target White Value - Novanta JADAK FM-8 User Manual

Auto Exposure

Allow the FM-8/FM-9 to control gain and exposure settings automatically. Default = Enabled.
Disable * Enable

Maximum Exposure

Set the maximum allowable exposure for the unit between 1 and 7874.
Several commonly used Max Exposure menu command barcodes are included below. If a
different value other than those provided is needed, it can be set either by sending the serial
command EXP_MAX x (where 'x' is a value between 1 and 7874), or by building a menu
command barcode. Please contact JADAK if assistance is needed. Default value = 100.
Setting examples:

Target White Value

Set the Target White Value within a range of 48 to 212.
Some menu command barcodes are included below. If a different value other than those
provided is needed, it can be set either by sending the serial command EXPTARG x (where 'x' is
a value between 48 and 212), or by building a menu command barcode. Please contact JADAK
if assistance is needed. Default value = 120.
Setting examples:
JADAK FM-8/FM-9 User's Manual