Snap An Image; Send An Image (To Host); Image Width And Height - Novanta JADAK FM-8 User Manual

Snap an Image

Use the command IMGSNAP to snap/take an image to with the FM-8/FM-9 Scanner.
You can add arguments for specific usage:
L=1 = use illumination
P=0 = Picture Type (0=decoding, 1=photo, 2=manual)
G=x = Gain value (x=1|2|4|8) (note: only works when P=2)
B=1 = beep on when snapping an image (0=off)
T=1 = wait for trigger (0=off).
More details and additional arguments for IMGSNAP can be found in the HELP dump list.

Send an Image (to Host)

Use the command IMGGETX to get or send an image from the device to the host via XModem.
You can add arguments to this command for specific usage
xm = sets the send-protocol to X Modem.
jpg = sends the image as jpeg format (default = bmp)
q=xx = sets the quality of the image, where xx is a value between 1 and 100 (highest quality)
Example: IMGGETX xm jpg q=30 sends the image as a jpg file via X Modem with a quality of 30
percent.
More details and additional arguments for IMGGETX can be found in the HELP dump list.

Image Width and Height

Use these commands to show the image's maximum width and height in pixels.
Maximum Width of Image
JADAK FM-8/FM-9 User's Manual
Maximum Height of Image