USB Interface Options
USB HID Keyboard Emulation
Scan the following code to program the FM-8/FM-9 for USB HID Keyboard mode.
Note: you'll need to have a hardware trigger-line set up in order to operate the FM-
8/FM-9 in USB HID Mode for scanning programming barcodes, as you won't be able to
send any serial commands anymore!
Note: The FM-8/FM-9 must be power cycled after programming this interface!
USB COM Port Emulation
Scan the following code to program the FM-8/FM-9 to emulate a regular RS-232-based
COM port.
Note: The FM-8/FM-9 must be power cycled after programming this interface!
JADAK FM-8/FM-9 User's Manual
USB HID Keyboard
USB COM Emulation