Miscellaneous Indicators; Beeper - Beep On [Bel]; Beeper - Power Up Beep; Aimer Mode - Novanta JADAK FM-8 User Manual

Miscellaneous Indicators

Beeper – Beep on [BEL]
Scan one of the following codes to enable or disable a beep sound on when a [BEL] is sent
from the host to the scanner. Default = Disabled.
Enable
Beeper – Power Up Beep
Scan one of the following codes to enable or disable the power-up beep cycle of the scanner.
Default = Enabled.
* Enable

Aimer Mode

The FM-8/FM-9 is equipped with an aimer that can help with positioning barcodes for quicker
decoding. Scan one of the following codes to enable or disable the aimer of the scanner, during
decode attempts. Default = Enabled (Alternating).
Note: When setting LEDSPWR 0, the 2
the aimer to remain visible when the illumination is turned off.
* Enable (Alt.)
JADAK FM-8/FM-9 User's Manual
nd Aimer Mode (i.e. 'Continuous') needs to be enabled for
Enable (Cont.)
* Disable
Disable
Disable