Figure 4-3 Typical Optical Output Pulse (50%) Duty Cycle At 3Khz; Figure 4-4 Typical Optical Output Pulse (50%) Duty Cycle At 5Khz - Novanta vi30 User Manual

OPERATING MODES
Always use shielded cable when connecting your PWM Command signal source to PWM
Positive/PWM Negative inputs. In electrically-noisy environments, long lengths of unshielded wire act
like an antenna and may generate enough voltage to trigger uncommand lasing.

Figure 4-3 Typical optical output pulse (50%) duty cycle at 3kHz.

Figure 4-4 Typical optical output pulse (50%) duty cycle at 5kHz.

Warning: Serious Personal Injury
PAGE | 41