Decode Window Left/Right; Decode Window Defaults - Novanta JADAK FM-8 User Manual

Decode Window Left/Right

The Left and Right boundaries for the decode window can be set either by sending the
serial command shown under the barcodes below with a value between 0 and 843,
or by scanning one of the barcodes below and then set the boundary pixel value by
scanning the digit codes and the SAVE barcode in
Please contact JADAK if assistance is needed.
Default Left boundary = WINDECL 338. Default Right boundary = WINDECR 506.
Decode Window Left

Decode Window Defaults

Set all Decode Window settings to their default configuration and values.
This is a screenshot of an example where a Decode Window with T=260, B=390, L=40, R=170
was used to speed up decoding a Data Matrix code that was offset to the left in the Field of View.
JADAK FM-8/FM-9 User's Manual
Appendix B .
Decode Window Right