Matrix 2 Of 5; Matrix 2 Of 5 Defaults; Matrix 2 Of 5 On/Off; Matrix 2 Of 5 Minimum And Maximum Length - Novanta JADAK FM-8 User Manual

Matrix 2 of 5

Matrix 2 of 5 Defaults

Set all Matrix 2 of 5 settings to their default configuration with this command.

Matrix 2 of 5 On/Off

Scan one of the codes below to enable or disable Matrix 2 of 5. Default = Disabled.
Enable

Matrix 2 of 5 Minimum and Maximum Length

Use the following commands in combination with numerical values to set the minimum
and maximum length for allowed Matrix 2 of 5 barcodes.
Default minimum length = 4. Default maximum length = 55.
The minimum and maximum length for this symbology can be set either by sending the
serial command shown under the barcodes below with a value between 1 and 55, or by
scanning one of the barcodes below and then set the length by scanning the digit codes
and the SAVE barcode in
Please contact JADAK if assistance is needed.
Matrix 2 of 5 Minimum Length
JADAK FM-8/FM-9 User's Manual
Appendix B .
* Disable
Matrix 2 of 5 Maximum Length