UPC-E(0)
UPC-E(0) Defaults
Set the UPC-E(0) settings to their default configuration with this code.
UPC-E On/Off
Scan one of the codes below to enable or disable UPC-E(0). Default = Enabled.
* Enable
UPC-E(0) Check Digit
The check digit is the last character and is used to verify data integrity. This digit is always
checked but it may be chosen whether or not to transmit it. Default=Transmit Check Digit.
* Transmit UPC-E Check
UPC-E(0) Expanded Mode On/Off
UPC-E(0) Expanded Mode expands the UPC-E(0) code to the 12 digit, UPC-A format. Scan one
of the codes below to enable or disable UPC-E(0) Expanded Mode. Default = Disabled.
Enable
JADAK FM-8/FM-9 User's Manual
Disable
Do Not Transmit UPC-E Check
* Disable