Table of Contents
Advertisement
5.9.
PRESET TAB
For each of the 10 Presets the following parameters are available:
Preset Name: This field allows the user to enter a name for each preset.
Preset Store: This control will take the current 7882J2KX-IPASI settings and save them to a Preset.
When storing a preset all parameters will be stored except the following:
•
Control Port IP address, Netmask and Gateway.
•
Data Port 1 and 2 IP address, Netmask and Gateway.
•
Syslog Configuration.
•
Presets.
•
SNMP Trap destinations, Faults and Video Notify status.
Preset Recall: This control will take the stored 7882J2KX-IPASI settings and apply them. When
recalling a preset all parameters will be set except the following:
•
Control Port IP address, Netmask and Gateway will not change.
•
Data Port 1 and 2 IP address, Netmask and Gateway will not change.
•
Syslog Configuration will not change.
•
Presets will not change.
•
SNMP Trap destinations, Faults and Video Notify status will not change.
Figure 5-12: VistaLINK
Revision 1.0
Single Channel J2K Encoder/Decoder
- Preset Tab Part 1
®
7882J2KX-IPASI
Page - 47
Advertisement
Table of Contents
